Microfusion Furnace M6 w/ Programmer
5.060,00 €
Impuestos incluidos
Estado de los stocks: Disponible para pre-pedido
Pre-pedido
Electric furnace for casting lost wax for jewelry work, with interior dimensions of 450 x 450 x 220 mm.
It includes a programmer for furnace casting incorporating a microprocessor with 15 programs in memory.
Each program has a delay time (delayed start) and to choose from one up to a maximum of 18 segments or ramps.
Each segment consists of a controlled ramp (temperature rise or fall) and a holding time.
Performs automatic stop at the end of cooking.
It has an indeformable structure, built in folded steel sheet and treated with epoxy paints.
The door is hinged on the left side and is insulated with high strength rigid ceramic fiber for a perfect fit, as well as incorporating a locking device for easy operation.
Insulation placed over the entire surface of the heating chamber is mounted with rigid ceramic fiber to ensure a low heat transfer coefficient, thus making thermal efficiency at its maximum.
The resistors are made of Kanthal wire and distributed on three sides (on the sides and below), placed inside refractory plates that protect the gases emitted by wax microfusion and any contact with the load.
Its power is calculated to achieve rapid heating of the furnace.
Characteristics:
External dimensions: 712 x 780 x 625 mm
Internal dimensions: 450 x 450 x 220 mm
Capacity in liters: 42
Maximum temperature: 1100 ° C
Power: 5 Kw
Refractory steel tray for collecting and evacuating liquid wax
Easily replaceable refractory plate heating chamber
Refractory tube located in the ground that acts as a chimney
Control panel connected to frame pin
It includes a programmer for furnace casting incorporating a microprocessor with 15 programs in memory.
Each program has a delay time (delayed start) and to choose from one up to a maximum of 18 segments or ramps.
Each segment consists of a controlled ramp (temperature rise or fall) and a holding time.
Performs automatic stop at the end of cooking.
It has an indeformable structure, built in folded steel sheet and treated with epoxy paints.
The door is hinged on the left side and is insulated with high strength rigid ceramic fiber for a perfect fit, as well as incorporating a locking device for easy operation.
Insulation placed over the entire surface of the heating chamber is mounted with rigid ceramic fiber to ensure a low heat transfer coefficient, thus making thermal efficiency at its maximum.
The resistors are made of Kanthal wire and distributed on three sides (on the sides and below), placed inside refractory plates that protect the gases emitted by wax microfusion and any contact with the load.
Its power is calculated to achieve rapid heating of the furnace.
Characteristics:
External dimensions: 712 x 780 x 625 mm
Internal dimensions: 450 x 450 x 220 mm
Capacity in liters: 42
Maximum temperature: 1100 ° C
Power: 5 Kw
Refractory steel tray for collecting and evacuating liquid wax
Easily replaceable refractory plate heating chamber
Refractory tube located in the ground that acts as a chimney
Control panel connected to frame pin
FUN003
Nuevo
TECHNOFLUX
TECHNOFLUX es una marca española especializada en el desarrollo y comercialización de herramientas, equipos, maquinaria y consumibles profesionales para joyería y orfebrería.
Perteneciente al grupo Jewelry Benmayor, TECHNOFLUX destaca por su innovación, calidad y amplia variedad de soluciones, diseñadas para responder a las necesidades de los profesionales del sector.
Su extensa gama de productos incluye alicates, herramientas de precisión, equipos de fundición, máquinas de pulido, aparatos de limpieza por ultrasonidos, productos químicos especializados y soluciones tecnológicas para corte, grabado y soldadura láser.
Con una firme apuesta por la investigación y el desarrollo, TECHNOFLUX ofrece soluciones para las diferentes etapas de fabricación de joyas, desde la preparación y transformación de metales preciosos hasta los procesos de limpieza, acabado y pulido.
En Lingold, valoramos TECHNOFLUX por su versatilidad, innovación y excelente relación calidad-precio, ofreciendo a joyeros y orfebres herramientas y equipos que contribuyen a un trabajo más preciso, eficiente y profesional.
375 produtos da marca
Comentarios (0)
No hay reseñas de clientes en este momento.
11 otros productos en la misma categoría:
