Special Liquid Silicone Prototypes 1000g
41,19 €
Impuestos incluidos
Estado de los stocks: Disponible para pre-pedido
Pre-pedido
Liquid silicone specially recommended for making prototyping molds in an easy and intuitive way.
Preparation:
The surface of the original must be clean and free of residue.
If the original is porous, use a suitable release agent. In a clean container, pour 100 parts by weight of Silicone A and 5 parts by weight of catalyst B, mix both components until completely dispersed. It can be mixed manually or with the help of a mechanical stirrer.
It is very important to remove the air by placing the mixture in a vacuum chamber, when you see that there are no bubbles you can use it. To remember that when making a vacuum there is an increase in volume (3 to 5 times) so it is convenient to use a container that is large enough.
* If you do not have a vacuum equipment, it can be applied on the piece, with a brush , a first layer of mixture 1 or 2 mm thick. Wait until the surface is free of bubbles.
Application and curing:
Pour the Silicone Catalyst mixture as soon as possible on the original. Avoid air occlusions. At room temperature (22-24ºC) the material will cure within 18-24h.
* Depending on needs, faster catalysts can be used. If the working temperature is much lower, the curing time will be somewhat longer.
Preparation:
The surface of the original must be clean and free of residue.
If the original is porous, use a suitable release agent. In a clean container, pour 100 parts by weight of Silicone A and 5 parts by weight of catalyst B, mix both components until completely dispersed. It can be mixed manually or with the help of a mechanical stirrer.
It is very important to remove the air by placing the mixture in a vacuum chamber, when you see that there are no bubbles you can use it. To remember that when making a vacuum there is an increase in volume (3 to 5 times) so it is convenient to use a container that is large enough.
* If you do not have a vacuum equipment, it can be applied on the piece, with a brush , a first layer of mixture 1 or 2 mm thick. Wait until the surface is free of bubbles.
Application and curing:
Pour the Silicone Catalyst mixture as soon as possible on the original. Avoid air occlusions. At room temperature (22-24ºC) the material will cure within 18-24h.
* Depending on needs, faster catalysts can be used. If the working temperature is much lower, the curing time will be somewhat longer.
FUN033
Nuevo
TECHNOFLUX
TECHNOFLUX es una marca española especializada en el desarrollo y comercialización de herramientas, equipos, maquinaria y consumibles profesionales para joyería y orfebrería.
Perteneciente al grupo Jewelry Benmayor, TECHNOFLUX destaca por su innovación, calidad y amplia variedad de soluciones, diseñadas para responder a las necesidades de los profesionales del sector.
Su extensa gama de productos incluye alicates, herramientas de precisión, equipos de fundición, máquinas de pulido, aparatos de limpieza por ultrasonidos, productos químicos especializados y soluciones tecnológicas para corte, grabado y soldadura láser.
Con una firme apuesta por la investigación y el desarrollo, TECHNOFLUX ofrece soluciones para las diferentes etapas de fabricación de joyas, desde la preparación y transformación de metales preciosos hasta los procesos de limpieza, acabado y pulido.
En Lingold, valoramos TECHNOFLUX por su versatilidad, innovación y excelente relación calidad-precio, ofreciendo a joyeros y orfebres herramientas y equipos que contribuyen a un trabajo más preciso, eficiente y profesional.
375 produtos da marca
Comentarios (0)
No hay reseñas de clientes en este momento.
6 otros productos en la misma categoría:
