Technoflux Bright Silver Plating Bath – 1 Litre

The Technoflux Bright Silver Plating Bath deposits a uniform, bright silver coating up to 8 microns thick, providing additional protection against oxidation.

The resulting finish has a bright silver colour, ideal for decorative applications and coating jewellery pieces.

Specifications

• Coating thickness: up to 8 microns.

• Operating voltage: 0.7–1.2 V, depending on the size of the piece.

• Operating temperature: 15–25 °C.

• Plating time: 10–60 seconds.

• Anode-to-cathode ratio: 1:1.

• Anode type: fine silver.

• Agitation: moderate.

Instructions for Use

1. Pour the contents of the bottle into the designated electroplating container.

2. Securely suspend the piece to be silver-plated using copper wire.

3. Clean the piece using an ultrasonic cleaner or with soap and water.

4. Rinse thoroughly under running water.

5. Without touching the piece directly with your hands, connect the equipment's clip to the copper wire supporting it.

6. Immerse the piece in container No. 1, equipped with a stainless steel anode and electrolytic degreasing solution, for 30–45 seconds at a voltage of 4–6 V.

7. Rinse under running water.

8. Rinse with distilled water in container No. 2.

9. Immerse the piece in the silver plating bath, in container No. 4, for 1–3 minutes.

10. Rinse with distilled water in container No. 5.

11. Dry with a soft cloth.

Attention: Silver plating cannot be carried out using less than 1 litre of product.