Bath Machine 1.5 L

This bath machine is suitable for both beginners and professionals.
Due to its special construction and easy handling, it is ideal for the galvanic coating of series or individual parts in the dipping process.
Due to its relatively small size and weight, this device is ideal for amateur goldsmiths, but also for companies.
The device has analog displays for volts and amps and is adjustable from 0 to 15 V and can be charged up to 2A.
The current limit is set on the upper rotary knob and the required voltage on the lower one.

It has two anode bridges (red), left and right, for galvanizing on both sides.
Attach the parts to be refined to the bridge in the middle (minus).

You do not necessarily need to use the container provided with this device. As the rectifier is self-contained, you can also use a larger container of your choice by slightly lifting the rectifier.
It also has a plus and minus output (suitable for 4mm lab cables), which you can use to operate a second electroplating vessel.

Technical Data:
Input: 230V
Power: 67W
Output: voltage 0-15 volts / current 0-2 amps continuously adjustable
Current limiting for overload protection
4mm lab jacks
Stable sheet steel housing with ventilation slots to compensate for overheating
Weight: 3.2kg
Displays: Voltage / Current
Dimensions: approx. 210 x 240 x 190 mm
Container: plastic, approx. 120 x 120 x 120 mm
Capacity approx. 1.5L, for objects up to approx. <70x80x70 mm

Delivery:
Galvanic system
1 electrolyte glass container approx. 1.5 liters
1 operation manual