- Nuevo
- Nuevo
Shiny Silver Bath 500 ml
46,85 €
Impuestos incluidos
Estado de los stocks: Muy bajo
Último artículo
WILAPLAT bright silver plating is to be used in a conventional electroplating system.
Prior to galvanic treatment, the surfaces to be coated must be clean and free from grease.
In order to avoid a current-free and therefore non-sticky silver coating, the rectifier must be switched on when the goods are submerged.
Characteristics:
Silver content: 30.0 g/l
Cyanide content: 120.0 g/l
Temperature: 20 - 30 ° C
Exposure time: 5 - 50 minutes
Voltage: 0.5 - 1.2 volts
Current density: 1.0 - 1.5 A / dm²
Deposition: 66.7 mg / amine
Movement: required
Anodes: fine silver
Bowl material: glass, alkali resistant. Plastic (PP, PVC, etc.)
Precipitation data: Density 10.3 g / cm³
Hardness: approx 110 HV
The product contains cyanides and is classified as very toxic.
Not to be associated with acids or acidic solutions
Prior to galvanic treatment, the surfaces to be coated must be clean and free from grease.
In order to avoid a current-free and therefore non-sticky silver coating, the rectifier must be switched on when the goods are submerged.
Characteristics:
Silver content: 30.0 g/l
Cyanide content: 120.0 g/l
Temperature: 20 - 30 ° C
Exposure time: 5 - 50 minutes
Voltage: 0.5 - 1.2 volts
Current density: 1.0 - 1.5 A / dm²
Deposition: 66.7 mg / amine
Movement: required
Anodes: fine silver
Bowl material: glass, alkali resistant. Plastic (PP, PVC, etc.)
Precipitation data: Density 10.3 g / cm³
Hardness: approx 110 HV
The product contains cyanides and is classified as very toxic.
Not to be associated with acids or acidic solutions
BAN075
1 Artículo
Nuevo
WIELAND
4 produtos da marca
Comentarios (0)
No hay reseñas de clientes en este momento.
2 otros productos en la misma categoría:
- Nuevo